800L Vertical Slim Line Rainwater Tank in Millstone Grit

The 800 Litre Vertical Slim Line Tank has a small footprint allowing you to utilise those small, out of the way spaces. It will allow you to harvest a substantial amount of rainwater to use in and around your garden.

This water butt will last for many years. Just make sure that it is installed on a flat, level base that will provide support throughout the year, regardless of weather conditions.Leave a gap of about 50mm all around the tank to allow for the natural expansion of the tank when full of water.

Leave a gap of about 50mm all around the tank to allow for the natural expansion of the tank when full of water. The rainwater diverter can located wherever it is required without affecting the tank's structural integrity, but should be fitted about 50mm from the top of the butt.

Just follow the instructions that come with the diverter. Ensure that the pipe running from the downpipe to the water butt is horizontal, so that it acts as an overflow when the tank is full.

Slim Line Tank Dimensions:

• Capacity: 800 Litres (175 gallons)
• Depth: 630 mm
• Height: 1790 mm
• Width: 820 mm
• Outlet: 1x 3/4 & 2x 1" BSP
• Lid: 9" Screwdown
• Weight: 35kg

Black Fast Flow Tap

The Black Fast Flow Tap makes the process of filling up your watering can quicker and easier than ever before!

• With a wider opening the Fast Flow Tap can offer a 50% faster flow than a standard Water Butt Tap.
• Suitable for most makes of water butt.
• 3/4" BSP Thread Fast Flow Tap.

1/2" Brass Tap Kit with 3/4" BSP Adapter

Add some style to your water butt with this 1/2" Brass Tap Kit with 3/4" BSP Adapter. Each kit consists of:

• 1 x 1/2" Brass Tap with 1/2" BSP Male Thread
• 1 x 1/2" BSP Female x 3/4" BSP Male Bush
• 1 x PTFE Thread Tape Suitable for wall mounting with separate bracket or for use with most common water butts when using supplied 3/4" Adapter. Please check your outlet size prior to ordering.

Gutter Mate Diverter & Filter (Black, White or Brown)

The Gutter Mate is UK's best selling, award winning Diverter & Filter that makes it easy to recycle rainwater straight from your downpipe. The only rainwater diverter and rainsaver that filters all rainwater before it enters the water butt, tank, drain or soakaway.

The diverter then automatically shuts off the flow to the water butt when full. Collecting rainwater with the Gutter Mate is both simple and efficient, whether you are saving rainwater to a water butt, tank or a full rainwater harvesting system.

The Gutter Mate is designed to accept 68mm, 76mm and 80mm diameter round downpipes and 65mm and 75mm square downpipes.

40L Submersible Water Butt Pump with Float Switch

This 40L submersible pump comes with float switch control and discharge extension and is perfect for emptying water butts. The float switch turns off automatically when the water level has dropped.

This product is supplied with 3 piece aluminium swan neck extension pipes and a snap on connector.

Technical Details:

Voltage: 230V
Maximum output: 40L/min
Maximum head height: 11M
Motor: 350W
Float Switch: Yes
Max particle diameter: 3mm
Hose adaptor diameter: 19mm

Deep Water Submersible Well Pump With Float Switch (1000W)

For use in areas where a large head height or high pressure is required. Will pump up to 15M deep.

Fitted with thermal overload protection and a float switch which automatically turns the pump off when the water level has dropped. Manufactured with quality in mind and comes with a 15M (approx.) cable and approved plug.

Technical Details:

Voltage: 230V
Maximum output: 91L/min
Maximum head height: 40M
Motor: 1000W
Float switch: Yes
Output aperture diameter: 25mm
Max particle diameter: 1mm
Hose adaptor diameter: 25mm
Weight: 3.6kg